|
Model
|
MN5180DLBEV
|
|
Chassis model
|
DFLZM LZ5183XXYM3AZBEVT
|
|
Fuel type
|
All-electric
|
|
Drive motor model
|
TZ370XS-LKM1101
|
|
Motor rated power/engine speed/torque（kW/r/min/N.m）
|
80/1270/600
|
|
Motor peak power/engine speed/torque（kW/r/min/N.m）
|
160/4500/1100
|
|
Power battery type
|
Lithium iron phosphate battery
|
|
Power battery manufacturer
|
CATL
|
|
The energy density of power battery（W·h/kg）
|
140
|
|
Total capacity of energy storing device（kWh）
|
314
|
|
Driving mileage（km）
|
260
|
|
EKG （Wh/km·kg）
|
≤0.25
|
|
GVW(kg)
|
18000
|
|
Curb weight(kg)
|
11870
|
|
Rated loading mass(kg)
|
5935
|
|
Dimension(Length /Width／Height)(mm)
|
9950×2510×3040
|
|
Wheelbase(mm)
|
5300
|
|
Front /rear suspension(mm)
|
1445/2560
|
|
Approach angle(°)
|
16
|
|
Departure angle(°)
|
13
|
|
Maximum travel speed(km/h)
|
88
|
|
Effective volume of feeding port(m³)
|
1.1
|
|
Dimension (width) of feeding port(mm)
|
1870
|
|
Height of feeding port from ground (empty load) (mm)
|
≤1280
|
|
Compression method
|
Bi-directional compression
|
|
Compression mechanism operating cycle time（s）
|
≤17
|
|
Unloading operating cycle time （s）
|
≤55
|
|
Lifting equipment operating cycle time（s）
|
≤11
|
|
Effective capacity of waste container (m³)
|
12.5
|
|
Sewage tank capacity (L)
|
1030
|
|
Garbage compression density(t/m3)
|
0.65-0.8
|
|
The maximum crushing compression force(kN)
|
162(optional equipment could incresed to 211)
|
|
The maximum shirking force (kN)
|
187
|
|
Hydraulic system operating pressure (MPa)
|
21
|
|
Main performance description
|
¿ The U-shaped integrally formed truss slot with high strength of Japanese technology is used as the movable guide rail of the garbage pushing plate, which has strong pressure resistance and good deformation resistance.
¿ The main components such as the trash can are made of B480GNQR high-strength weather-resistant steel plate produced by Shanghai Baosteel, and are designed with an arc shape, which is simple and beautiful, has a large effective volume, outstanding overall structural performance, and strong impact resistance.
¿ Equipped with a large-capacity sewage tank, combined with a diversion type sewage collection device, the sewage that leaks between the filler and the garbage tank body due to the failure of the sealing strip can be diverted to the special sewage collection tank, effectively preventing the leakage of sewage Secondary pollution.
¿ Equipped with two-way compression function, high compression efficiency and large garbage loading capacity. When unloading, after the filler is lifted into place, the scraper and slide plate automatically realize a cycle to remove the garbage remaining in the filler.
¿ A sealing cover plate (national patent technology) is set at the opening of the filler. The cover plate is opened and closed by pneumatic control, which is easy to operate and can effectively prevent the secondary pollution of garbage and odor.
|
|
Tank material and thickness
|
B480GNQR high-strength weather-resistant steel plate
Shanghai Baosteel，designed with an arc shape
Large effective volume, outstanding overall structural performance, and strong impact resistance
|
|
Anti-rust related processes
|
¿ Before welding, all parts should not stick to water, and there should be no rust marks andrust marks; The inner side of each reinforcing rib (channel steel, etc.) and the base metal welding position must be coated with anti-rust primer (grass green epoxy primer);
¿ Reinforcing ribs such as square pipes must be fully welded with sealing plates on both sides;
¿ Use ordinary welding wire for welding;
¿ 20mm on the left and right sides of the welding position must be cleaned before welding;
¿ After welding, the slag and spatter around the weld must be removed;
¿ After the welding is completed, the whole vehicle is sprayed with paint;
|
( 0 )سلة الاستفسارات 
مسح لزيارة
